About This

• Important Size: The total size of our car CV axle boot is 5*3.88*3.88 inch, the inside diameter of the small opening at the top is 0.91 inch, applicable to the shaft range of 22-23 mm, and there are 3 cuttable calibers at the bottom, which are 2.42 inch / 3.02 inch / 3.52 inch respectively
• Thickened Silicone: Silicone is used as the main material of the car CV joint boot, which is thickened to allow the boot to flexibly cope with various stress scenarios in the process of use, avoiding the problem of cracking for your long-term use
• Upgrade Kit: In addition to the regular clamps, car CV boots, and ties in our car CV boot kit, we also provide you with special cut-off pliers, which solves the problem of the details in the repair, and can easily cut off the excess length of the clamps (no car CV boot expander tool in package)
• Good Protection: If the CV joints are not protected, they will easily come into contact with external dust, mud, etc., which will lead to wear and tear of the parts. Using our car CV axle boot kit, we can reduce the contact with dust from the root and effectively slow down the wearing of the parts
• Steps for Use: 1. Place the car CV boot expander tool on the universal joint. 2. Flip the car CV axle boot, align it with the car CV boot expander tool, and push it in firmly. 3. Take out the clamps or ties to secure them. The excess length of the clamp is cut off with a pair of cutting pliers